Juniper CTP151 Platform, Hardware Manual, Page: 61 / 104

NOTE: You must provide mounting screws that are appropriate for your rack or cabinet to mount
the chassis on a rack or a cabinet.
RELATED DOCUMENTATION
CTP151 Platform Overview | 3
Unpacking a CTP151 Device | 51
Registering Products—Mandatory for Validating SLAs
Register all new Juniper Networks hardware products and changes to an existing installed product using
the Juniper Networks website to activate your hardware replacement service-level agreements (SLAs).
CAUTION: Register product serial numbers on the Juniper Networks website and
update the installation base data if there is any addition or change to the installation
base or if the installation base is moved. Juniper Networks will not be held accountable
for not meeting the hardware replacement service-level agreement for products that
do not have registered serial numbers or accurate installation base data.
Register your product(s) at https://tools.juniper.net/svcreg/SRegSerialNum.jsp .
Update your installation base at
https://www.juniper.net/customers/csc/management/updateinstallbase.jsp .
Mounting a CTP151 Device on Two Posts in a Rack
You can mount a CTP151 device on two posts of a 19-in. rack (either a two-post or a four-post rack). One
pair of mounting brackets for mounting the device on two posts of a rack is supplied with each device.
For mounting the device on a four-post rack, you can use the supplied two-post rack-mounting kit and
secure the device to two of the posts.
Before mounting a CTP151 device on two posts in a rack:
53