Juniper CTP151 Platform, Hardware Manual, Page: 45 / 104

Table 17: EIA-530 DTE Connector Interface Signals for HD-26 to Male DB-25 (continued)
Description DB-25 Pin HD-26 Pin
Receive Clock—A (input to CTP) 17 4
Receive Data—A (input to CTP) 3 5
Data carrier detect—A (input to CTP) 8 6
Data terminal ready—A (output from CTP) 20 7
Request to send—A (output from CTP) 4 8
Request to send—B (output from CTP) 19 9
Clear to send—B (input to CTP) 13 10
Clear to send—A (input to CTP) 5 11
Data set ready—A (input to CTP) 6 12
Local loopback (output from CTP) 18 13
Transmit Data—B (output from CTP) 14 14
Transmit Clock (from DTE)—B (output from CTP) 11 15
Transmit Clock (from DCE)—B (input to CTP) 12 16
Receive Clock—B (input to CTP) 9 17
Receive Data—B (input to CTP) 16 18
Data carrier detect—B (input to CTP) 10 19
Data terminal ready—B (output from CTP) 23 20
Test mode (input to CTP) 25 21
Remote loop (output from CTP) 21 22
Ground 7 24, 26
Data set ready—B (input to CTP) 22 25
36