Juniper CTP151 Platform, Hardware Manual, Page: 39 / 104

USB Port Specifications for a CTP151 Device
The following Juniper Networks USB flash drives have been tested and are officially supported for the
USB port in the CTP151 device:
•
RE-USB-1G-S—1-gigabyte (GB) USB flash drive
•
RE-USB-2G-S—2-GB USB flash drive
•
RE-USB-4G-S—4-GB USB flash drive
CAUTION: Any USB memory product not listed as supported for the CTP151 device
has not been tested by Juniper Networks. The use of any unsupported USB memory
product could expose your device to unpredictable behavior. Juniper Networks
Technical Assistance Center (JTAC) can provide only limited support for issues related
to unsupported hardware. We strongly recommend that you use only supported USB
flash drives.
CAUTION: Remove the USB flash drive before upgrading CTPOS or rebooting the
CTP151 device. Failure to do so could expose your device to unpredictable behavior.
NOTE: USB flash drives used with the CTP151 device must support USB 2.0 or later.
NOTE: If the CTP151 device does not boot from the internal SSD drive, you must reinstall the
CTPOS software using a USB installation image.
RELATED DOCUMENTATION
CTP151 Platform Overview | 3
Bringing Up the CTP151 with CTPOS on Internal SSD | 76
30