Jungheinrich EKS 410, Operating Instructions Manual

Page: 80 / 99

F 13
0
708
.GB
5.5 Hydraulic oil
– Prepare the truck for maintenance and repairs
M
Oil must never be allowed to enter the drainage system or the soil. Used oil must be
preserved until it can be disposed of in the correct manner.
Draining oil:
Suction off the hydraulic oil with the
discharge filter removed (5). If this is not
possible, the hydraulic oil can be drained
from the bottom of the hydraulic
reservoir after the oil drain screw (8a)
has been unscrewed.
Adding oil:
Screw in the oil drain screw (8a).
Replenish with new hydraulic oil up to
the Max. mark on the dipstick (7). Screw
the discharge filter backon.
F
Check which hydraulic oil is being added. If Plantohyd 22 S
BIO hydraulic oil is being used, the warning: “Only add BIO
hydraulic oil” (8b) will be on the hydraulic reservoir. In this case
you may only use Hydrauliköl „Plantohyd 22 S BIO hydraulic
oil to fill the hydraulic reservoir.
F
You cannot change from the Plantohyd 22 S BIO hydraulic oil to HLP D22. The same
applies to changing from HLP D22 hydraulic oil to Plantohyd 22 S BIO hydraulic oil.
Furthermore, you cannot mix HLP D22 hydraulic oilt Plantohyd 22 S BIO hydraulic oil.
Checking the hydraulic oil level
When the mast is fully lowered, check that the hydraulic oil level is between the min.
and max. markings on the dipstick (7).
If this is not the case, add new hydraulic oil.
5
7
8a
8b
F 13
0
708
.GB
5.5 Hydraulic oil
– Prepare the truck for maintenance and repairs
M
Oil must never be allowed to enter the drainage system or the soil. Used oil must be
preserved until it can be disposed of in the correct manner.
Draining oil:
Suction off the hydraulic oil with the
discharge filter removed (5). If this is not
possible, the hydraulic oil can be drained
from the bottom of the hydraulic
reservoir after the oil drain screw (8a)
has been unscrewed.
Adding oil:
Screw in the oil drain screw (8a).
Replenish with new hydraulic oil up to
the Max. mark on the dipstick (7). Screw
the discharge filter backon.
F
Check which hydraulic oil is being added. If Plantohyd 22 S
BIO hydraulic oil is being used, the warning: “Only add BIO
hydraulic oil” (8b) will be on the hydraulic reservoir. In this case
you may only use Hydrauliköl „Plantohyd 22 S BIO hydraulic
oil to fill the hydraulic reservoir.
F
You cannot change from the Plantohyd 22 S BIO hydraulic oil to HLP D22. The same
applies to changing from HLP D22 hydraulic oil to Plantohyd 22 S BIO hydraulic oil.
Furthermore, you cannot mix HLP D22 hydraulic oilt Plantohyd 22 S BIO hydraulic oil.
Checking the hydraulic oil level
When the mast is fully lowered, check that the hydraulic oil level is between the min.
and max. markings on the dipstick (7).
If this is not the case, add new hydraulic oil.
5
7
8a
8b