Jungheinrich EKS 410, Operating Instructions Manual

Page: 59 / 99

0
206
.GB
E 22
5.1 Emergency stop device
When the automatic emergency stop mechanism applies (e.g. if the wire guidance is
lost, electrical steering fails) the truck brakes to a halt. Before starting again, the
cause of the error must be identified and corrected. Start the truck again in
accordance with manufacturer’s instructions contained in these operating instructions
(see “Starting up the Truck” in Chapter E).
5.2 Driver’s cab / Aux. Lift emergency lowering
F
When using emergency lowering, make sure that nobody is present in the danger
zone. If a second person is used to lower the load handler via the emergency lowering
device, this person must consult with the driver. Both people must be in a safe area
to avoid danger.
The truck may only be started again once the error has been localised and rectified.
If necessary, a second person can be deployed to lower the cabin from the ground.
– Remove the Allen key from the bracket above the beacon.
– Insert the Allen key into the hole (48).
– Slowly open the drain valve (47) using the Allen key.
– The cabin will lower.
48
47
0
206
.GB
E 22
5.1 Emergency stop device
When the automatic emergency stop mechanism applies (e.g. if the wire guidance is
lost, electrical steering fails) the truck brakes to a halt. Before starting again, the
cause of the error must be identified and corrected. Start the truck again in
accordance with manufacturer’s instructions contained in these operating instructions
(see “Starting up the Truck” in Chapter E).
5.2 Driver’s cab / Aux. Lift emergency lowering
F
When using emergency lowering, make sure that nobody is present in the danger
zone. If a second person is used to lower the load handler via the emergency lowering
device, this person must consult with the driver. Both people must be in a safe area
to avoid danger.
The truck may only be started again once the error has been localised and rectified.
If necessary, a second person can be deployed to lower the cabin from the ground.
– Remove the Allen key from the bracket above the beacon.
– Insert the Allen key into the hole (48).
– Slowly open the drain valve (47) using the Allen key.
– The cabin will lower.
48
47