Jungheinrich EKS 410, Operating Instructions Manual

Page: 55 / 99

0
206
.GB
E 18
Picking up a load from the front
– Drive the truck slowly.
– Slowly insert the forks into the pallet
until the fork shank touches the load or
the pallet.
– Raise the load slightly and slowly
reverse the truck.
M
The ground surface must be in good
condition to ensure this works correctly.
Transporting a load
– Always transport a load outside the
narrow aisle as low as possible, allowing for ground clearance.
– Always transport loads with both forks. When transporting heavy loads always
ensure that both forks carry an equal weight.
– Gradually accelerate.
– Drive at constant speed.
– Always be prepared to brake. Only stop suddenly in dangerous situations.
– Reduce speed accordingly at narrow bends.
Depositing a load
– Drive the truck carefully up to the storage location
M
Before a load can be deposited, the driver must ensure that the storage location is
suitable for storing the load (size and capacity).
– Raise the load handler so that the load
can enter the storage location without
striking any objects.
– Carefully push the load into its storage
location.
– Carefully lower the load handler so
that the forks are clear of the load.
M
Avoid placing the load down suddenly to
avoid damaging the load and the load
handler.
– Carefully remove the load handler
from the load.
– Fully lower the load handler.
0
206
.GB
E 18
Picking up a load from the front
– Drive the truck slowly.
– Slowly insert the forks into the pallet
until the fork shank touches the load or
the pallet.
– Raise the load slightly and slowly
reverse the truck.
M
The ground surface must be in good
condition to ensure this works correctly.
Transporting a load
– Always transport a load outside the
narrow aisle as low as possible, allowing for ground clearance.
– Always transport loads with both forks. When transporting heavy loads always
ensure that both forks carry an equal weight.
– Gradually accelerate.
– Drive at constant speed.
– Always be prepared to brake. Only stop suddenly in dangerous situations.
– Reduce speed accordingly at narrow bends.
Depositing a load
– Drive the truck carefully up to the storage location
M
Before a load can be deposited, the driver must ensure that the storage location is
suitable for storing the load (size and capacity).
– Raise the load handler so that the load
can enter the storage location without
striking any objects.
– Carefully push the load into its storage
location.
– Carefully lower the load handler so
that the forks are clear of the load.
M
Avoid placing the load down suddenly to
avoid damaging the load and the load
handler.
– Carefully remove the load handler
from the load.
– Fully lower the load handler.