Jungheinrich EKS 410, Operating Instructions Manual

Page: 58 / 99

E 21
0
206
.GB
Z
If, after carrying out the remedial action, the truck cannot be restored to operation or
if a fault in the electronics system is displayed with a corresponding error code,
contact the manufacturer’s service department.
Additional troubleshooting must only be performed by the manufacturer’s specialist
service engineers. The manufacturer has a customer service department specially
trained for these tasks.
To provide targeted and rapid response to faults, the following details are useful and
important to provide for the customer service department:
- Truck serial number
- Display unit error number (if present)
- Error description
- Current location of truck.
Error 144 – Truck has quit
guidance wire
– Restore wire guidance
Error 330 – Travel control button
pressed during power-
up test
– Do not press travel control button, switch
truck off and on again
Error 331 – Hydraulic control
button pressed during
power-up test
– Do not press hydraulic control button,
switch truck off and on again
Error 332 – During the power-up
test a key was
pressed below the
display unit
– Do not press key, switch truck off and on
again
Error 333 – During the power up
test a function
preselect key aux. lift
was pressed
– Do not press function preselect key aux.
lift, switch truck off and on again
Error 334 – Foot switch pressed
during power-up test
– Do not press foot switch, switch truck off
and on again
Error 344 – Personal safety
system
– PSA scanner contaminated, clean
Fault Possible cause Action
E 21
0
206
.GB
Z
If, after carrying out the remedial action, the truck cannot be restored to operation or
if a fault in the electronics system is displayed with a corresponding error code,
contact the manufacturer’s service department.
Additional troubleshooting must only be performed by the manufacturer’s specialist
service engineers. The manufacturer has a customer service department specially
trained for these tasks.
To provide targeted and rapid response to faults, the following details are useful and
important to provide for the customer service department:
- Truck serial number
- Display unit error number (if present)
- Error description
- Current location of truck.
Error 144 – Truck has quit
guidance wire
– Restore wire guidance
Error 330 – Travel control button
pressed during power-
up test
– Do not press travel control button, switch
truck off and on again
Error 331 – Hydraulic control
button pressed during
power-up test
– Do not press hydraulic control button,
switch truck off and on again
Error 332 – During the power-up
test a key was
pressed below the
display unit
– Do not press key, switch truck off and on
again
Error 333 – During the power up
test a function
preselect key aux. lift
was pressed
– Do not press function preselect key aux.
lift, switch truck off and on again
Error 334 – Foot switch pressed
during power-up test
– Do not press foot switch, switch truck off
and on again
Error 344 – Personal safety
system
– PSA scanner contaminated, clean
Fault Possible cause Action