manualshive.com logo in svg

JUMPtec superMOPSpro, Technical Manual, Page: 73 / 93

Share
Download
JUMPtec superMOPSpro Technical Manual Download Page 73

Network Operation

super

MOPS

pro

Copyright 

JUMP

tec

 

Industrielle Computertechnik AG

Page: 73 of 93

CRYSTAL'S BBS SERVICE

You can obtain the latest CS89XX drivers and support software from Crystal's BBS. Access to the
BBS is available 24 hours a day, seven days a week. Baud rates from 300K to 14.4K are supported
as well as
most common file transfer protocols.

To access the BBS, set your terminal software to use 8 data bits, 1 stop bit, and no parity.  Dial _(512)
441-3265_ and press _ENTER_ after connection  is made.  Login using your account name and
password. (If you do not have an account, you may login as "GUEST". No password is required for
the Guest account.)

From the main system menu, select the "Enter Public File Area" menuoption.  From the Public File
Area menu, select the "LAN (Local Area Network)" file area.  A list of the latest drivers and support
utilities available for the CS89XX ISA Ethernet adapter will be presented along with the option to
download the file(s).

Summary of Contents for superMOPSpro






























































































Reviews:

No comments