User Information
super
MOPS
pro
Copyright
JUMP
tec
Industrielle Computertechnik AG
Page: 5 of 93
Warranty
Each board is carefully and thoroughly tested before being shipped. If, however, problems should
occur during the operation, please check your user specific settings of all boards included in your
system. This is often the source of the fault. If a board is defective, it can be sent to your supplier for
repair. Please take care of the following steps:
1. The board returned should correspond to the factory default settings since a test is
only possible under this settings.
2. Upon receipt of the board, please be aware that your user specific settings could
have been changed during the repair and tests.
Within the guarantee, the repair is free as long as the guarantee conditions were kept. If no fault has
been found, you will be charged with the test cost due to the high test expenditure. Repairs outside
the guarantee period will be charged.
This
JUMP
tec
product is warranted against defects in material and workmanship for our guaranteed
warranty period from the date of shipment. During the warranty period,
JUMP
tec
will, at its option,
either repair or replace products which prove to be defective.
For warranty service or repair, the product must be returned to a service facility designated by
JUMP
tec
.
The foregoing warranty shall not apply to defects resulting from improper or inadequate maintenance
or handling by the customer, unauthorized modification or misuse, operation outside of the
environmental specifications for the product, or improper installation or maintenance.
JUMP
tec
will not be responsible for any defects or damages due to a faulty
JUMP
tec
product other
than the products supplied by
JUMP
tec
.