Working with the superMOPSpro
super
MOPS
pro
Copyright
JUMP
tec
Industrielle Computertechnik AG
Page: 23 of 93
Menu Item 4
” Auto Configuration with BIOS Defaults” will load default values from the ROM table. This is allways
a very save configuration and may help with some BIOS problems.
Menu Item 5
+-----------------------------------------------------------------------------+
¦ AMIBIOS SETUP PROGRAM - AUTO DETECT HARD DISK ¦
¦ (C)1992 American Megatrends Inc., All Rights Reserved ¦
¦-----------------------------------------------------------------------------¦
¦ Cyln Head WPcom LZone Sect Size (MB) ¦
¦ Hard Disk C: Type : 47=USER TYPE 684 16 65535 684 38 203 ¦
¦ Hard Disk D: Type : Not Detected ¦
¦ ¦
¦ ¦
¦ ¦
¦ +------------------------------------+ ¦
¦ ¦ ¦ ¦
¦ ¦ Accept Parameters for D: (Y/N) ? N ¦ ¦
¦ ¦ ¦ ¦
¦ +------------------------------------+ ¦
¦ ¦
¦ ¦
¦ ¦
¦ ¦
¦ ¦
¦ ¦
¦ ¦
¦ ¦
+--------------------------------ESC:EXIT-------------------------------------+
This menu item allows an autodetection of most hard disk types, however some older disks don’t
support autodetection and have to be configured manually in menu item 1.
Autodetection won’t configure the optional onboard silicon disk, this drive has to be configured in the
extension setup described later in this manual.
Menu Item 6
” Hard Disk Utility” will only be described in a short way, because this menu item is only useful with
old hard disk types. This feature makes a low level format and is not needed with today’s hard disks.
JUMP
tec
gives the advice not to use this item except you’re sure about the consequences.
Menu Item 7
” W rite To CMOS And Exit” leaves the AMIBIOS-SETUP and saves the actual settings in the flash
EPROM.
Menu Item 8
” Do Not Write To CMOS And Exit” leaves the AMIBIOS-SETUP without saving the actual settings.
Old settings will stay active.