manualshive.com logo in svg

JUMPtec superMOPSpro, Technical Manual, Page: 50 / 93

Share
Download
JUMPtec superMOPSpro Technical Manual Download Page 50

Network Operation

super

MOPS

pro

Copyright 

JUMP

tec

 

Industrielle Computertechnik AG

Page: 50 of 93

WINDOWS FOR WORKGROUPS - DOS ODI CLIENT DRIVER INSTALLATION

Use the DOS ODI driver (EODIISA.COM) to connect a Windows for Workgroups client to a Novell
NetWare 3.12 or 4.X server. Perform the installation using Novell's ” NetWare Client for
DOS/WINDOWS”   Installation package.

1) From a DOS prompt start the Novell installation program from the NetWare WSDOS_1 diskette

(NetWare Client for DOS/WIN, Disk 1).

 
2) At the NetWare Client Installation panel set the destination directory to where you want to store

your NetWare files.  The directory will be created if it does not exist.

 
3) Make sure you have answered "Yes" to the question about modifying your AUTOEXEC.BAT and

CONFIG.SYS files. If you wish to use Windows as a NetWare client answer "Yes" to install
support for Windows and specify the path to your Windows directory.

 
4) Highlight the option to select the driver and press <ENTER>.
 
5) From the "Network Board" dialog page to the end of the list and select the "Other Drivers" option.
 
6) Insert the drivers diskette.  Press <ENTER> to accept the default path.
 
7) Choose "Crystal ISA Ethernet Adapter EODIISA" as the driver.
 
8) When the "Settings" panel is displayed enter selections for the desired Frame Type(s). Valid

frame types are:

         Ethernet_802.2 (default)
         Ethernet_802.3
         Ethernet_II
         Ethernet_SNAP

         Up to a maximum of four frame types are supported.

NOTE: The first frame type you specify must be one used by the IPX protocol on the NetWare
server to which you wish to connect. Ethernet_802.2 is the default frame type for NetWare 3.12
and 4.X servers. (Contact your Network Administrator to determine the frame types supported by
your server.)

An optional Node Address can be assigned if desired. Only assign a local Node Address in
accordance with IEEE 802.2 specifications.  A universally administered address is assigned at the
factory and is used by default.

9) Return to the NetWare Client Install panel, select the "Highlight here and press <Enter> to install"

option and press <ENTER>.

 
10) Exchange disks as prompted.
 
11) When the installation process is complete, reboot the system.
 
12) The installation process will automatically configure Windows for Workgroups as a NetWare

client. Be sure to login to the file server from the DOS prompt each time before you start
Windows.

Summary of Contents for superMOPSpro






























































































Reviews:

No comments