JUMO dTRANS pH 02, Operating Manual, Page: 50 / 136

7 Commissioning
50
Basic setting for optional board 1
Administrator level/Password/Parameter level/Optional inputs/Analog input 1
Basic setting for optional board 2
Administrator level/Password/Parameter level/Optional inputs/Analog input 2
Controller settings
See chapter 13.6.1 "Simple limit monitoring", page 94.
Operating mode pH measurement
Signal type 4 to 20 mA
Start of scaling -600 mV (depending on the two-wire
transmitter)
End of scaling +600 mV (depending on the two-wire
transmitter)
Temperature compensation source Optional input 2
Operating mode Temperature
Signal type Pt100
Connection type 2-wire