JUMO dTRANS pH 02, Operating Manual, Page: 10 / 136

3 Identifying the device version
10
0 Not used
1 Analog input (universal)
2 Relay (1× changeover)
3 Relay (2× normally open)
4 Analog output
5 2 PhotoMOS
®
relays
b
6 Solid state relay 1 A
7 Voltage supply output DC ±5 V (e.g. for ISFET)
8 Voltage supply output DC 12 V (e.g. for inductive proximity switch)
(6) Optional slot 2
0 Not used
1 Analog input (universal)
2 Relay (1× changeover)
4 Analog output
5 2 PhotoMOS
®
relays
6 Solid state relay 1 A
7 Voltage supply output DC ±5 V (e.g. for ISFET)
8 Voltage supply output DC 12 V (e.g. for inductive proximity switch)
(7) Optional slot 3
0 Not used
1 Analog input (universal)
2 Relay (1× changeover)
3 Relay (2× normally open)
4 Analog output
5 2 PhotoMOS
®
relays
6 Solid state relay 1 A
7 Voltage supply output DC ±5 V (e.g. for ISFET)
8 Voltage supply output DC 12 V (e.g. for inductive proximity switch)
10 RS485 interface
11 Data logger with interface RS485
c
12 PROFIBUS-DP interface
(8) Voltage supply
23 AC 110 to 230 V, +10/-15 %, 48 to 63 Hz
25 AC/DC 20 to 30 V, 48 to 63 Hz
(9) Extra codes
d
000 None
a
Can be changed on the device.
b
PhotoMOS
®
is a registered trademark of Panasonic Corporation.
c
The only way to read files is with the PC setup software!
d
List extra codes in sequence, separated by commas.
(1) (2) (3) (4) (5) (6) (7) (8) (9)
Order code / - - - - - - / , ...
Order example 202551 / 01 - 8 - 01 - 2 - 2 - 4 - 23 / 000