JUMO dTRANS pH 02, Operating Manual, Page: 126 / 136

18 Appendix
126
Analog outputs
Analog outputs 1 to 3
Signal source
No signal
Main value
Not comp. Main value
Temperature
Option input 1
Option input 1 not compensated
Option input 2
Option input 2 not compensated
Option input 3
Option input 3 not compensated
Math 1
Math 2
Differential signal
Flow rate
Partial quantity
Total quantity
Output controller 1
Output controller 2
Setpoint 1 controller 1
Setpoint 2 controller 1
Setpoint 1 controller 2
Setpoint 2 controller 2
Signal type 0 to 20 mA
4 to 20 mA
20 to 0 mA
20 to 4 mA
0 to 10 V
10 to 0 V
Scaling start 2.00 to 0.00 to 15.00 pH
Scaling end 0.00 to 16.00 pH
At calibration Moving
Frozen
Safe value
In case of error
(output signal, of the
controller in case of error) 0/4 mA/0 V
20 mA/10 V
Frozen
Safety value
Hold mode
(output signal, of the
controller in Hold mode) Frozen
Safety value
Standard mode
0/4 mA/0 V
20 mA/10 V
Safety value 0.0 to 20.0 mA
Simulation Off
On
Simulation value Off
0.0 to 20.0 mA
Parameter Selection/value range
Factory setting New setting