JUMO AQUIS touch S 202581, Installation Instructions Manual

Page: 92 / 130

8 Operation
92
8.2.2 User level
The user level consists of a user-defined list of parameters and configuration
settings. You need the JUMO PC setup program to configure the user level.
⇨
see B 202581.0 in the "PC Setup Program" chapter
The user level can be opened from the device menu only if it has been config-
ured beforehand with the aid of the PC setup program. If this has not been done,
there is no user level in the device menu.
Opening the user level provides easy and uncomplicated access to the selected
parameters and settings. These can be edited from here. The entry dialog is
opened by tapping the display field for a desired data point.
View of the user level (example)
To make an en-
try,
tap the display
NOTE!
Changing the date/time settings and the configuration data that are relevant for
recording of measurement data initiates a restart of measurement data record-
ing by the data monitor or recording function. This is also the case if the change
is made from the user level. The restart terminates the current recording of
measurement data. In the case of the "Data monitor" function, the content of
the screen is deleted.
Additional information on the recording function can be found in the operating
manual.
⇨
see B 202581.0