JUMO AQUIS touch S 202581, Installation Instructions Manual

Page: 84 / 130

8 Operation
84
(3) Detailed screen 1 Freely configurable large-section screen
Display of 1 main measuring value, 1 second measuring value, 1
additional value and up to 3 binary values, as well as additional vi-
sualization of the main measuring value and the alarm limits for an
analog input with a bar graph
(4) Detailed screen 2
(5) Detailed screen 3
(6) Detailed screen 4
(7) Detailed screen 5
(8) Detailed screen 6
(9) Diagram
group 1 Up to 4 analog measuring values and 3 digital functions can be dis-
played on a configurable recorder screen. Diagrams of disabled
groups are not available in the operation loop.
(10) Diagram
group 2
(11) Process screen User-defined visualization screen that is freely configurable by
means of an editor in the PC setup program
⇨
B202581.0
With the aid of static and dynamic graphic and display elements for
analog and binary values, it is possible to create a screen that dis-
plays the process flow concerned in an especially vivid manner. If
no process screen is configured, none is available for the operation
loop.
(12) Controller over-
view The active controller channels are visualized here in an overview
display. The controller overview becomes available as part of the
operating loop only if at least 2 controllers are activated. The cur-
rent setpoint values, actual values and output levels are displayed
for all active controllers. In addition, the operating states of the con-
trollers are displayed (manual mode, hold, self-optimization).
(13) Controller screen
Controller 1 The controllers are visualized in detail on the controller screens.
The controller screens are available as part of the operation loop
only for the respectively configured channels. The information dis-
played includes the current setpoint value, actual value and output
level. The binary values of switching controller outputs are visual-
ized. In addition, controls for setpoint value entry, manual output
level control and self-optimization are available. Access to the op-
erating functions depends on the user rights of the logged-in user.
(14) Controller screen
Controller 2
(15) Controller screen
Controller 3
(16) Controller screen
Controller 4
Diagram Operator screen Description