JUMO AQUIS touch S 202581, Installation Instructions Manual

Page: 27 / 130

27
5 Mounting
Procedure
Step Action
1 Use the drilling diagram to mark the mounting holes on the mount-
ing surface. You can also use the mounting plate as a template for
this purpose.
Leave enough space around the cable entries to permit routing of
cables.
2 Use suitable fastening screws (4) in order to ensure that the screw
heads are at a distance of about 1 cm from the mounting surface.
3 Using the screws (3), fasten the mounting plate (2) to the the back
of the unit (1).
4 Hook the device (1) and where applicable the weather protection
canopy (5) with the mounting plate into the screws.
5 Tighten the fastening screws.