JUMO 202580, Installation Instructions Manual

Page: 64 / 82

18 Technical data
64
18.1.2 Temperature measuring input (IN 5)
18.1.3 Universal input (IN 6)
18.1.4 Measuring circuit monitoring base unit
Probe-/Signal type Connection type Measuring
range Measuring accu-
racy Ambient
temperature
influence
Pt100 DIN EN 60751 2-wire/3-wire -200 to +850 °C
≤
0.05% of MR
a
a
MR: measuring range span
≤
50 ppm/K
Pt1000 DIN EN 60751 2-wire/3-wire -200 to +850 °C
≤
0.1% of MR
a
≤
50 ppm/K
Resistance transmitter/
Resistance potentiome-
ter 3-wire 0 to 100 k
Ω
0.5% of R
Tot
b
b
R
Tot
: total resistance of the resistance transmitter/Resistance potentiometer
≤
100 ppm/K
RTD temperature probe
with customer-specific
characteristic line
c
c
Customer-specific linearization can be used to enter a sensor characteristic line.
up to 400
Ω
2-wire/3-wire 0 to 400
Ω ≤
0.1% of R
max
d
d
R
max
: maximal resistance across the measuring range (400
Ω
,
4000
Ω
or 100 kW)
≤
100 ppm/K
to 4000
Ω
2-wire/3-wire 0 to 4000
Ω
to 100 k
Ω
2-wire/3-wire 0 to 100 k
Ω
NTC 8k55 2-wire/3-wire 0 to 150 °C
≤
0.1% of R
max
d
≤
100 ppm/K
NTC 22k 2-wire/3-wire 0 to 150 °C
Sensor lead resistance maximal 30
Ω
per line with 3-wire circuit
Lead compensation Not required for 3-wire circuit. With a 2-wire circuit, lead calibration can
be executed at the respective input by means of an measured value cor-
rection with the aid of the "Offset" setting.
Signal type Measuring
range Measuring accu-
racy Ambient
temperature
influence
Current signal 0(4) to 20 mA 0.1% of MR
a
a
MR: measuring range span
100 ppm/K
Inputs Underrange/
overrange
Temperature input Yes
Universal input (current signal) Yes