JUMO 00725428, Operating Manual, Page: 30 / 36

8 Technical data
30
8.2 Output
8.3 Interface
Number 1 output in IO-Link operation (output signal according to IO-Link communica-
tion standard version 1.1, see section "Interface ", Page 30)
2 outputs for switch operation (SIO mode; SIO = standard IO)
Switching functions configurable Hysteresis function or window function
Normally closed contact or normally open contact
Output p-switching (PNP) or n-switching (NPN)
Switch-on and switch-off delay
Switching current ≤100 mA per output
Voltage drop at switching transistor ≤ 2 V
Short-circuit proof
Yes (clocked)
Reverse polarity protected Yes
Current limiting Yes
Hysteresis
For hysteresis function Configurable
For window function Fixed setting (symmetrical; ±0.25 % of the measuring range)
Switch-on, switch-off delay 0 to 100 s
Communication interface IO-Link device V 1.1 (downward compatible to V 1.0)
Communication mode (data trans-
fer rate) COM3 (230.4 kBaud)
IO Device Description (IODD) The IODD can be localized and downloaded on the JUMO website in the prod-
uct area for this device or at www.io-link.com with the "IODDfinder".
Max. line length acc. to IO-Link
standard 20 m
Min. cycle time 2 ms
Output mode
Switching output type Transistor switching output can be configured as NPN or PNP
Short-circuit proof Yes (clocked)
Resistant to overload Yes
Protected against polarity re-
versal Yes
Ampacity of the switching out-
puts 100 mA in each case
Voltage drop of the switching
outputs Max. 2 V in each case