FX-3R Maintenance Guide
3-7
3-3-5. Amplifier
Setting
Use as it is the amplifier in the factory-settings.
Turn on the power supply to make sure that the status shown in the following figure is provided.
Rev. 1.00
<LED status>
L = Light ON operation
Mode switch
Electronic volume position
8 = Maximum sensibility
T = Teaching mode
Figure 3-3-5-1 Bad Mark Sensor Indication
The orange and green LEDs come on simultaneously.
→
Stable operation status at ON
Only the orange LED comes on.
→
Unstable operation status at ON
The orange and green LEDs go out simultaneously.
→
Unstable operation status at OFF
Only the green LED comes on.
→
Stable operation status at OFF