FX-3R Maintenance Guide
13-21
13-4-6. IP-X5 Board Assembly (40047528)
[Functions]
This IP-X5 board is an image processing board that processes image data, such as board mark
and IC mark captured by the OCC camera to calculate values necessary for correction of the
board position and/or part position.
[DIP switch settings]
The DIP switches have been set properly at the delivery of the machine. When setting the board
in the control unit, check the DIP switch settings. (
portions show the switch positions.)
SW3-1 ：OFF
SW3-2 ：OFF
SW3-3 ：OFF
SW3-4 ：ON
SW6-1 ：OFF
SW6-2 ：OFF
SW6-3 ：OFF
SW6-4 ：OFF
SW8-1 ：OFF
SW8-2 ：OFF
SW8-3 ：OFF
SW8-4 ：OFF
SW4-1 ：OFF
SW4-2 ：ON
SW4-3 ：OFF
SW4-4 ：ON
SW4-5 ：ON
SW4-6 ：ON
SW4-7 ：ON
SW4-8 ：ON
SW5-1 ：OFF
SW5-2 ：ON
SW5-3 ：OFF
SW5-4 ：OFF
SW5-5 ：ON
SW5-6 ：ON
SW5-7 ：ON
SW5-8 ：ON
SW7-1 ：OFF
SW7-2 ：OFF
SW7-3 ：OFF
SW7-4 ：OFF
Figure 13-4-6-1 DIP switches on IP-X5 Board Assembly
∗
SW7 is a piano type switch, which is operated from the front panel.
[Front panel switches]
∗
Basically, do not operate these switches.
RESET SW: Resets this board.
ABORT SW: Issues NMI to the CPU.
DIP switch:
Changes the settings of the board.
[Adjustment items after replacement]
After that, follow the steps below to update the FLASH memory.
c
Select [Options] and [Change User Group], and then select [Serviceman].
d
Select [Maintenance] and [MS Parameter Setup].
e
Select [Upgrade] and [Display].
f
Clicking [Exec.] will start the upgrading process.
Rev. 1.00