JUKI AMS-210ENHL2210/TF10S, Instruction Manual

Page: 87 / 293

– 74 –
1. When the intermediate presser rests at its lower position,
the movement of the intermediate presser and needle
differ depending on the setting of MEMORY switch U103.
2. When increasing the height of intermediate presser
or making the needle size thicker, con fi rm the clear-
ance between the wiper and the components. Wiper
cannot be used unless the clearance is secured. In
this case, turn OFF the wiper switch, or change the
set value of memory switch U105.
Refer to "II-3. MEMORY SWITCH DATA LIST" p.95 for
the memory switch settings.
A
B
When ONE-STITCH BACKWARD button or FOR-
WARD button is pressed, the feed (current point )
moves backward or forward by one stitch. When two or more
commands have been entered, the feed position does not
change but the command display
A is moved forward and
backward. When you keep pressing the button or , the
moving speed increases.
Indicated value B is the absolute value (Intermediate press-
er height value + Intermediate presser height increased/de-
creased value).
When COMMAND SEARCH FORWARD button or
BACKWARD button is pressed, the feed moves forward
or backward from the current point to reach the needle entry
point where the
fi rst intermediate presser command is found.
To stop the feed, press button , , , , or .
When INTERMEDIATE PRESSER button is pressed,
the intermediate presser is raised or lowered. (This button is
not displayed when MEMORY switch U103 is set at 0 (zero).)
When PRESSER INITIAL POSITION button is
pressed, the work clamp moves to its origin and the screen is
restored to the sewing screen.
When COMMAND DELETE button is pressed, the
screen for deleting the command as shown in A is displayed.
When is pressed, the intermediate presser height
increase/decrease input screen is displayed.
Input a desired value on this screen using numeric keypad and
+/- keys .
When ENTER button is pressed, the data is con fi rmed.