JUKI AMS-210ENHL2210/TF10S, Instruction Manual

Page: 140 / 293

– 127 –
ENGLISH
■
Adding grease onto the eccentric cam section
Use grease tube B (part number: 40013640) (in light violet) supplied with the unit for add-
ing grease to any points other than the points speci
fi ed below. If any grease other than the
speci fi ed one is used, the related components can be damaged.
1) Tilt the machine head and remove the grease
cover
❶
.
2) Fill coupling
❹
supplied with the unit with
grease through JUKI Grease B tube
❺
.
3) Remove setscrew
❸
in oscillator gear
❷
and
screw in joint
❹
into the screw hole.
4) Sink screw
❻
supplied with the unit into the
coupling to add the JUKI Grease B.
5) Securely tighten setscrew
❸
which has been
removed after replenishing with the grease.
■
Adding grease onto the oscillating rock shaft pin section
(3) Points to be applied with JUKI Grease B
The eccentric cam section
can be suf
fi ciently fi lled with
grease by adding the grease
while turning the main shaft of
sewing machine.
1) Open crank rod cover
❶
.
2) Remove setscrew
❸
from the grease
inlet cover located at periphery of
crank rod
❷
.
3) Fill coupling
❹
with grease through
JUKI Grease B tube
❺
.
4) Sink screw
❻
supplied with the unit
into the coupling to add the grease.
5) After adding the grease, securely
tighten setscrew
❸
which has been
removed.
❷
❶
❹
❷
❹ ❺
❻
❸
❷
❶
❸
❹
❻
❹
❺