JUKI AMS-210ENHL2210/TF10S, Instruction Manual

Page: 30 / 293

– 17 –
ENGLISH
6) Check to be sure that the operation indicating lamp goes out when a garment body is not placed on
the throat plate auxiliary cover and lights up when a garment body is placed there.
7) To set the threshold at a desired value, press
the "UP/DOWN" button to set a new thresh-
old.
* The factory-set threshold at the time of ship-
ment is "300" (garment body sensors, A, B, A
IN/OUT, B IN/OUT).
1. In the case the operation indicating lamp lights up when a garment body is not placed
on the machine, increase the threshold.
2. Clean up the garment body detection hole in the throat plate auxiliary cover with an air
gun since a false detection by the garment body detection sensor can be caused if the
hole is covered.
3. Do not place hands over the garment body detection sensor when you start the sewing
machine. The sensor can detect erroneously to fail to properly determine A, B, IN and
OUT. (This caution is particularly important when you have re-adjusted the sensor to
lower the threshold.)