JUKI AMS-210ENHL2210/TF10S, Instruction Manual

Page: 76 / 293

– 63 –
ENGLISH
It is possible to sew only the speci fi ed location for the pattern which sews two or more tapes.
Example) Only the fi rst and third tapes are sewn for the pattern which sewing three tapes
①
Displaying the sewing tape selection screen
When SEWING TAPE SELECT button , the sewing
tape selection screen is displayed.
The tape to be sewn can also be selected on the sewing
screen.
②
Selecting the tape to be sewn
Select the tape(s) to be sewn from . The numerical values
1 to 5 indicate the number of each tape, i.e., 1st, 2nd, 3rd, 4th
and 5th.
Separately select the tapes for the OUT and IN.
Buttons are displayed in reverse video every time they are
pressed. means that the 1st tape is to be sewn and
means that the 1st tape is not to be sewn.
When CLEAR button is pressed, the buttons in
state are all changed over to .
After the completion of selection of the tape to be sewn, press
ENTER button .
The data which you have set will not be automatically
returned to the initial setting.
In the case you have selected a special tape for the
purpose of re-sewing, return the tape selection setting
to the initial setting after you have
fi nished re-sewing.
4-7. Selection of the tape to be used