JUKI AMS-210ENHL2210/TF10S, Instruction Manual

Page: 85 / 293

– 72 –
A
B
When ONE-STITCH BACKWARD button or FOR-
WARD button is pressed, the feed (current point )
moves backward or forward by one stitch. When two or more
commands have been entered, the feed position does not
change but the command display
A is moved forward and
backward. When you keep pressing the button or , the
moving speed increases.
Indicated value B is the absolute value (Thread tension value
+ Thread tension command value).
When COMMAND SEARCH FORWARD button or
BACKWARD button is pressed, the feed moves for-
ward or backward from the current point to reach the needle
entry point where the
fi rst thread tension command is found.
To stop the feed, press button
, , , ,
or .
When INTERMEDIATE PRESSER button is pressed,
the intermediate presser is raised or lowered. (This button is
not displayed when MEMORY switch U103 is set at 0 (zero).)
When PRESSER INITIAL POSITION button is
pressed, the work clamp moves to its origin and the screen is
restored to the sewing screen.
When COMMAND DELETE button is pressed, the
screen for deleting the command as shown in A is displayed.
When is pressed, the thread tension value increase/
decrease input screen is displayed.
Input a desired value on the thread tension value increase/de-
crease input screen using numeric keypad and +/– keys .
When ENTER button is pressed, the data is con-
fi rmed.