JUKI AMS-210ENHL2210/TF10S, Instruction Manual

Page: 83 / 293

– 70 –
④
Proceed stitching with the presser lowered.
The sewing shape is displayed at the center of the screen. The
current point, sewing start position and sewing end position
are respectively represented by (pink circle), (blue dot) and
(pink dot).
Check the sewing shape using ONE-STITCH BACKWARD
button
and ONE-STITCH FORWARD button
. When two or more commands have been entered, the feed
position does not change but the command display A is moved
forward and backward. When you keep pressing the ONE-
STITCH FORWARD or BACKWARD button, the moving speed
increases.
When the COMMAND SEARCH FORWARD button
is pressed, the feed automatically moves to the sewing end
position. When the COMMAND SEARCH BACKWARD button
is pressed, the feed automatically moves to the sew-
ing start position.
⑤
Finish checking the shape.
When PRESSER INITIAL POSITION button is pressed, the work clamp moves to the
sewing start position and the screen is restored to the sewing screen. When CANCEL button
is pressed, the screen is also restored to the sewing screen. When the work clamp does not rest at
the sewing start or end position, sewing can be started by depressing the foot switch before sewing
shape checking is not completed.
CANCEL button is enabled only at the tape feeding position found by the tape feeding posi-
tion retrieval.
When the screen is restored to the sewing screen by means of CANCEL button , sewing can
be carried out from that position by pressing the START switch.
At any position other than the tape feeding position,
fi nish the shape checking by pressing the
FEEDING FRAME INITIAL POSITION button since the CANCEL button is disabled
In the case the screen is restored from the shape checking screen to the sewing screen by
pressing the CANCEL button at the tape feeding position, sewing can be carried out from
that position.
Re-sewing is enabled from the middle of the previous sewing after the tape sewing part.
To stop the feed, press button , , , , or .
When INTERMEDIATE PRESSER button is pressed, the intermediate presser is raised or
lowered. (This button is not displayed when MEMORY switch U103 is set at 0 (zero).)
When TAPE FEED POSITION SEARCH FORWARD button is pressed, the feeding frame
moves forward from the current position until the tape feeding position which is found for the fi rst
time. When TAPE FEED POSITION SEARCH BACKWARD button is pressed, the feeding
frame moves backward from the current position until the tape feeding position which found for the
fi rst time.
A