Step #6 Turning Off the Spoiler Stick Trim
Step #7 Establishing Flight Modes
Step #8 Wing and Tail Type Select
Step #9 Entering FUNC.LIST
S-44
S-45
In the
SYSTEM M.
list, highlight
TRIM STEP
. Depress
the
Selector
to access the TRIM STEP menu. Highlight
SPOI
and press the
Selector
to access the spoiler trim
value. Rotate the
Selector
until a 0% is shown. This
will turn off the spoiler trim, preventing any unwanted
interaction with the spoiler trim and the spoiler stick.
Depress the
Selector to
store the desired 0% value in
the model memory. Press the
LIST
button to return to the
System Mode screen.
In the
SYSTEM M.
list, highlight
Devic. SEL
. Depress
the
Selector
to access the Device select menu. Initially,
we are going to activate three of the available five flight
modes (Launch, Cruise and Land). Highlight
LAUN
and
press the
Selector
to access the available switches the
flight mode can be assigned to. For our purpose, assign
the LAUN flight mode to L3P SW (left 3-position switch).
Later you can change the flight mode to the position that
best suits your needs. Highlight L3P SW and press the
Selector
to store the desired left 3-position switch. Press
the
LIST
button to return to the System Mode screen.
In the
SYSTEM M.
list, highlight
Wing TYPE
. Depress
the
Selector
to access the Wing Type menu. If your
sailplane has a V-tail, highlight V-tail and press the
Selector
to select
ACT
. Rotate the
Selector
to access the
DUAL FLAP
function and press the
Selector
to
access dual flap if your sailplane has individual servos
for each flap. Press the
LIST
button to return to the
System Mode screen.
To enter the
Function list
, turn on the transmitter, then
press the
LIST
button on the transmitter. The following
screen appears.
Summary of Contents for X9503 2.4
Page 43: ...A 56...
Page 103: ...S 68...
