Flap and AUX Functions
Wing Type
S-14
S-15
You can assign Flap and Auxiliary functions to operate
from several different switches, buttons or the throttle
stick. In device select, highlight the desired flap or aux
function and press the
Selector
to access the available
switches you can program to operate each function.
Select the desired switch by highlighting it and press
the
Selector
.
Activating / Inhibiting Channels
You can inhibit Channels 5 (motor), 7–9, to use them as
slave channels in programmable mix. Highlight the ACT/
INH below the desired channel. Press the Selector to inhibit
or activate the channel.
This screen allows the selection of V-tail, dual flap and,
when dual flaps are activated, aileron-to-flap trim.
To access Wing type in
System mode
list, rotate the
Selector
to highlight
Wing TYPE
. Then press
to access
the wing type screen.
If your sailplane has a V-tail, activate the V-tail function by
highlighting
INH
and pressing the
Selector
.
If your sailplane has dual flaps, activate the dual flap
function by highlighting
INH
and pressing the
Selector
.
If you choose to have aileron trim to also affect the flaps,
activate the
AILE-FLAP
trim function.
Summary of Contents for X9503 2.4
Page 43: ...A 56...
Page 103: ...S 68...
