Activating and Assigning Flight Modes
Activating and Assigning Flight Modes (continued)
Motor Function
S-12
S-13
In the factory default setting, all flight modes are inhibited.
You can activate and assign flight modes to the desired
switch positions using the SPEED and LAUN functions in
the Device SEL screen.
In system mode list rotate the
Selector
until
Device SEL
is highlighted. Then press to access the Device Select
screen.
To activate the launch, cruise, and land mode, rotate the
Selector
until
LAUN
is highlighted and then press the
Selector
. The following screen appears:
At this point, you must decide which 2- or 3-position
switch you prefer to assign the flight mode to. If you
select a 2-position switch, launch and cruise are active. If
you select a 3-position switch, launch, cruise and land are
activated. For convenience, we recommend starting with
the L3P (left 3 position) switch. Rotate the
Selector
until
the desired switch is highlighted and press to select.
AIL D/R =
Aileron dual rate switch
ELE D/R =
Elevator dual rate switch
RUD D/R =
Rudder dual rate switch
AUX4 =
Auxiliary 4 switch
R3P =
Right 3-position switch
L3P =
Left 3-position switch
BTFL =
Butterfly switch
To activate the speed thermal flight modes, highlight
SPEED
and press the
Selector
to select the desired
switch position.
Important
: When you activate the speed and
thermal flight modes, launch and land always have
priority. To access speed or thermal, the launch
switch must be in the cruise position. Try selecting
the various flight modes several times while looking
at the main info screen to quickly become familiar
with the switch priority.
Note
: On the main info screen, the activated flight
mode displays on the top center of the screen.
Note
: You can select the flight mode switch direction
when launch mode is programmed to a switch.
Select
NORM
or
REV
. to reverse the direction of the
launch land switch to meet your preferences.
You can assign the motor function to operate from several
different switches, buttons or the throttle stick. In device
select, highlight
MOTO
and press the
Selector
to access
the available switches you can program to operate the
motor.
Select the desired switch by highlighting it and press
the
Selector
.
AIL D/R =
Aileron dual rate switch
ELE D/R =
Elevator dual rate switch
RUD D/R =
Rudder dual rate switch
AUX4 SW = Auxiliary 4 switch
R3P SW =
Right 3-position switch
L3P SW =
Left 3-position switch
BTFL SW = Butterfly switch= Auxiliary 4 switch
TIME SW = Timer button
SPOI ST =
Spoiler stick
Note
: If dual flaps are activated, the motor function
is not assigned to a channel. You will need to use
a programmable mix to mix MOTO to any open
auxiliary channel in order to operate the throttle
when dual flaps are activated. Also see Motor Hold
on page S-27 for more details.
Summary of Contents for X9503 2.4
Page 43: ...A 56...
Page 103: ...S 68...
