ACCESS THE SYSTEM MENU
RESET THE MODEL
A-2
A-3
When setting up a new model you should reset all
parameters to their default or factory settings before
proceeding with any other programming. This ensures
there are no program mixes, trims or other functions left
over from a previous model or programming session.
1. In the
SYSTEM Menu
, highlight and select
MDL
Reset
using the
Selector
.
2. Press the
CLR
button that is next to
RES
on the display.
3. Press the lowermost button next to
YES
on the display
to reset all data for this model.
4. Return to the SYSTEM Menu by pressing
the
LIST
button.
To set up a new model, first select the desired model
memory. Generally an unused model memory is selected.
However, memory that already contains data for another
model may be used, as long as data for that model is no
longer required since any data in that memory will be
lost.
1. In the SYSTEM Menu, highlight and select
Model
SEL
using the Selector. The currently selected model
number displays. If you want a different model,
highlight and select the displayed model and a list of
models will appear. Scroll up and down the list using
the Selector.
2. Use the Selector to highlight and select the desired
model memory.
3. Return to the
SYSTEM Menu by pressing the
LIST
button.
1. To access the System menu
[SYSTEM M.],
hold
down the
ENT
button while turning the transmitter on.
SELECT A MODEL MEMORY
Summary of Contents for X9503 2.4
Page 43: ...A 56...
Page 103: ...S 68...
