2
Foreword
This landing gear is a product that is at the state of the art with
regard to the safety afforded to operating personnel. Neverthe-
less, the landing gear(s) can pose a danger if it is used by insuf-
ficiently trained personnel, used incorrectly or not in accordance
with the intended use. Reference is made to potential dangers in
chapter 4 "Safety" and by safety instructions throughout the docu-
mentation. This documentation is intended to ensure safe and cor-
rect work on and with the landing gear. It contains safety instruc-
tions that must be complied with!
The E-Drive module is type-approved according to ECE E1
10R-043838. Modifications of any kind will render both the war-
ranty and the design approval void and therefore also cancel the
vehicle's operating licence.
Everyone who works on and with the landing gear must have this
documentation available during their work, and must comply with
the information and instructions that are relevant to them.
The documentation must always be complete and fully legible.
JOST-Werke Deutschland GmbH is not liable for technical or print-
ing errors in this documentation, and neither is it liable for damage
attributable directly or indirectly to the delivery, performance or
utilisation of this documentation.
ADVICE!
Technical modifications reserved. The latest informa-
tion can be found at www.jost-world.com
2.1
Identification
The landing gear is clearly identified by the content of its type
plate.
ATTENTION!
Make sure that the type plate is not damaged, it must
be renewed if necessary.
Manufacturer
JOST-Werke Deutschland GmbH
Siemensstr. 2, 63263 Neu-Isenburg
Tel: +49 6102 295-0
Fax: +49 6102 295-298
www.jost-world.com
EN
Modul E-Drive
MUB 006 001 M01
(REV-D)
07-2020
5
