4
Safety
4.5
General safety regulations and obligations
In general, the following safety regulations and obligations apply
when working with the landing gear:
The landing gear is only allowed to be operated if in fault-free
and clean condition.
It is prohibited for any protective and safety devices to be
removed, modified, defeated or bypassed.
It is prohibited for the landing gear to be converted or modi-
fied without written approval by the supplier.
Malfunctions or damage must be reported to the owner
immediately. This must be corrected immediately.
Only genuine spare parts are allowed to be used during
repairs.
The safety instructions and operating instructions in the doc-
umentation for the components used must be taken into
account in any event.
All protective and safety devices must be checked regularly by
the owner and maintained.
Only instructed, trained or qualified people are allowed to
work with and on the landing gear.
Operation of the landing gear is subject to national employee
protection regulations as well as national health and safety
and accident prevention regulations.
In addition, comply with the regulations in BGI 599 "Safe
hitching of vehicles".
EN
Modul E-Drive
MUB 006 001 M01
(REV-D)
07-2020
13
