10 Disposal
10.1 Principle
ADVICE!
Dispose of the parts of the landing gear in an environ-
mentally friendly way, following sorting into material
types, when it is time to take the unit out of service per-
manently.
Prior to disposal, check if the materials and landing gear parts can
be reused. Send as many of them as possible for reuse.
When doing so, comply with the information from the manufac-
turer and the corresponding regulations and legislation.
10.2 Procedure
Landing gear and electric drive
The mounted parts are valuable raw materials that can be recy-
cled. They can be split into plastics, rubber and metallic materi-
als. Plastics and rubber are identified according to VDA recommen-
dation 260. Before disposal, parts may need to be cleaned of any
residual oil or grease.
When disposing of electronic components such as circuit boards,
cables and electric motor, comply with the waste regulations of
the country in question. Further information about this is available
from your local disposal office.
Lubricant
The particular manufacturer of the lubricant will supply the dis-
posal instructions for the lubricants used.
Dispose of used lubricants as special waste, disposal key no.
120 112 EAK
PCB content: free of PCB
Halogen content: free of halogen
EN
Modul E-Drive
MUB 006 001 M01
(REV-D)
07-2020
39
