Jonix 70MATEWHITE, Use And Maintenance Manual

Page: 32 / 48

32
JO NIX
mate
20
21
22
Fig. 21: Gently unscrew the tubes, using
the green plastic base. If you have trouble,
first pull off the outer mesh.
Fig. 22: Screw delicately the ionising tube
holding on to the base (green part).
If the operation is difficult to perform, pull
slightly the earthing spring so that it is not in
contact with the surface of the tube.
ATTENTION: do not overtighten the screw
after reaching its end stop.
Check that the earthing spring
is in contact with the outer
mesh once the ionising tubes
have been screwed back into
place. Otherwise contact the
manufacturer.
Fig. 20: Unscrew the four screws of the box
with which it is anchored to the cabinet and
pull it out by the specific handle.
If the operation is difficult
to perform, pull slightly the
earthing spring so that it is not
in contact with the surface of
the tube.