Jonix 70MATEWHITE, Use And Maintenance Manual

Page: 21 / 48

21
JO NIX
mate
7.8.5.4 Time slots
d) Activation: enable / disable time slots mode.
e) Start time: start time of the time slot.
f) Machine status: enable / disable
JO NIX
mate
.
g) L Module: enable / disable the left ionising module.
h) R Module: enable / disable the right ionising module.
i) Air flow: set up of the fan airflow.
j) Copy button: allow to copy the time slots of a day in one or more different days. Touching the
button, a dialog box will appear where must be chosen the day from which the slots will be
copied and the day in which they will be copied. Once the operation will be confirmed, the day
displayed will be changed in the one in which are just been copied the time slots.
Up to 4 time slots for every day of the week can
be set.
a) Time slots mode: enable / disable time slots
mode.
b) Day: day of the week selected.
Every time slot is defined by different parameters:
c) Slot: for each day of the week it is possible to
set up to 4 time slots.
When time slots are enabled it is not possible change the operating status of the
ionising modules or the air flow rate of the fan in their corresponding screens
(7.8.2 and 7.8.4).
k) Save button: when the user begin to modify a time slot, this button appears to apprise that a
modification to the previous settings is occurring and needs to be saved in the memory of the
system. When the saving operation is successfully finished the button disappears.
NOTE: it is possible to copy the slots in one single day for time. To copy the slots in
more days this action must be repeated.
NOTA: it is always necessary to save before changing the day (using the menu in the
box b) or leave the menu. If not, the modification will be lost.
If only one time slot is set or enabled, the device will operate with the parameters set
in that slot until it will be disabled or will be added another slot.
The setting of the start time of the next slot (in the same day or in another) implies
the end of the previous time slot.