Johnson Controls York AYK550, User Manual

Page: 26 / 279

YORK, A Johnson Controls Company
$
6$( ?
'&` h
The very first time the drive is powered up, it is in the auto control
(AUTO) mode, and is controlled from the Control terminal block X1.
To switch to hand control (HAND) and control the drive using the control panel, press
and hold the
or button.
• Pressing the HAND button switches the drive to hand control while keeping the
drive running.
• Pressing the OFF button switches to hand control and stops the drive.
To switch back to auto control (AUTO), press and hold the button.
3`,2`&44h
To start the drive press the HAND or AUTO buttons, to stop the
drive press the OFF button.
!4 =h
To modify the reference (only possible if the display in the upper right
corner is in reverse video) press the UP or DOWN buttons (the reference changes
immediately).
The reference can be modified in the local control mode, and can be parameterized
(using Group 11 reference select) to also allow modification in the remote control
mode.
%@,23
To change the parameters, follow these steps:
Select MENU to enter the main menu.
F
Select the Parameters mode with the UP/
DOWN buttons, and select ENTER to
select the Parameters mode.
Q
Select the appropriate parameter group
with the UP/DOWN buttons and select
SEL
]
Select the appropriate parameter in a
group with the UP/DOWN buttons. Select
EDIT to change the parameter.
Press the UP/DOWN buttons to change
the parameter value.