Johnson Controls Joventa DM1.1, Installation Instructions Manual

Page: 4 / 20

English
IS_DMS1.1(S) / DM1.1(S) / DML1.1(S) / DMG1.1(S)_14-88360-1890_Rev. D_11 2010
This document is subject to change without notice
2
Ordering Codes
Codes Descriptions
DMxx1.1 Actuator AC/DC 24 V
DMxx1.1.S Actuator AC/DC 24 V with 2 auxiliary switches
Technical Specifications
Actuators
DMS1.1(S) DM1.1(S) DML1.1(S) DMG1.1(S)
Drive torque 8 Nm 16 Nm 24 Nm 32 Nm
Damper area 1.5 m
2
3.0 m
2
4.5 m
2
6 m
2
Running time 30 s 80 s 125 s 200 s
Indipendent of load, at nominal conditions and room temperature
Power supply AC 24 V ±20% / DC ±10%
Frequency 50-60 Hz
Power consumption:
- operating 2.5 W
- at end stops 0.3 W
For wire sizing 6.0 VA / 3.6 A @ 2ms
Control signals
Y1 DC 0...10 V / Ri > 250 K Ω
Y2 0...20 mA / Ri 388 Ω
Position Signal U DC 0...10 V / R > 50 K Ω
Angle of rotation:
- Working range 90° (93° mech.)
- Limiting 5°...85° in 5° steps
Auxiliary switch rating 3 (1.5) A, AC 230 V
Service life 60'000 cycles
Sound power level 45 dB (A)
Protection class II
Degree of protection IP 54 (with cable glands, cable downwards)
Temperature: operating/store -20°...+50 °C / -30°...+60 °C
Humidity 5...95% RH (not condensing)
Weight 1.1 kg
Maintenance Maintenance-free
Compliance
Johnson Controls, Inc., declares that these products are in compliance
with the essential requirements and other relevant provisions of the
EMC Directive 2004/108/EC and Low Voltage Directive 2006/95/EC