QUANTUM™ LX COMPRESSOR CONTROL PANEL
COMMUNICATIONS SETUP
090.020-CS (APRIL 13)
Page 10
ETHERNET SETUP
Once all of the cabling has been run and all connections
have been made, it is now necessary to setup the Quan-
tum™ LX software to recognize and handle the Ethernet
connection.
The following section describes the suggested panel setup
for connecting the Quantum™ LX panel to an existing Eth-
ernet connection:
IP DATA
Address Type
- The following drop-down menu is pro-
vided:
•
Fixed (Static)
– A
fi
xed address is usually as-
signed by the network (LAN) administrator, and
is normally always the same.
•
DHCP (Dynamic)
– Dynamic Host Con
fi
guration
Protocol permits auto-assignment of temporary
IP addresses for new devices connecting to the
network.
IP Address
– (Internet Protocol) Four setpoint boxes are
provided here. Every device on an Internet or Ethernet
network must be assigned a unique identifying number,
called an IP Address (this is similar in concept to the
Quantum™ LX panel ID number). The IP address is how
the network identi
fi
es each device that is attached. A typ-
ical IP address would look like this:
• 216.27.61.137
Gateway Address
– Four setpoint boxes are provided
here. This is the IP address for the computer or device
onto which your local network is connected to. This gate-
way device is how all of the devices attached to your local
network are routed to other gateways and networks. A
router is a Gateway device that routes packets between
different physical networks. A gateway is a network point
that acts as an entrance to another network.
Subnet Mask
- A TCP/IP number used to determine to
which TCP/IP subnet a device belongs. Devices in the same
subnet can be communicated with locally without going
through a router When a TCP/IP device tries to communi-
cate with another device the bits of the TCP/IP destination
address are "ANDed" with the subnet mask to determine
whether the address is a local address (broadcastable)
or must be reached through a router. A subnet mask of
255.255.255.0 used by a computer with a TCP/IP address of
10.10.10.1 would include the addresses 10.10.10.0 through
10.10.10.255 in the local network basically telling the com-
puter to try a router if it's transmitting to any other IP ad-
dress. This is all part of the TCP/IP protocol
Web Server Port
– This is the port, or channel, that a
web server uses to communicate through. Just as a com-
puter sends data to a printer through a printer port, a web
server sends and receives data through the Web Server
Port. By default, the port number for a Web server is 80.
NAMING DATA
NOTE:
The IP Address Type must be set to DHCP (Dy-
namic) for this section to work.
Host Name
– Enter a distinct name that you wish to be
DESCRIPTION:
This screen is used to allow the user to assign and setup Ethernet and Email communications parameters.
Summary of Contents for Frick QUANTUM LX
