- 24 -
The Owner/User shall
ensure that lift operators are qualified and that they are trained in
the safe use and operation of the lift using the manufacturer’s operating instructions;
ALI/SM 93 -1, ALI Lifting it Right safety manual; ALI/ST-90 ALI Safety Tips card; ANSI/ALI
ALOIM-2013, American National Standard for Automotive Lifts-Safety Requirements for
Operation, Inspection and Maintenance; ALI/WL Series, ALI Uniform Warning Label
Decals/Placards; and in case of frame engaging lifts, ALI/LP-GUIDE, Vehicle Lifting
Points/Quick Reference Guide for Frame Engaging Lifts.
The Owner/User shall
establish procedures to periodically inspect the lift in accordance
with the lift manufacturer’s instructions or ANSI/ALI ALOIM-2013, American National
Standard for Automotive Lifts-Safety Requirements for Operation, Inspection and
Maintenance; and the User shall ensure that the lift inspectors are qualified and that they
are adequately trained in the inspection of the lift.
The Owner/User shall
establish procedures to periodically maintain the lift in accordance
with the lift manufacturer’s instructions or ANSI/ALIOIM-2013, American National Standard
for Automotive Lifts-Safety Requirements for Operation, Inspection and Maintenance; and
the User shall ensure that the lift maintenance personnel are qualified and that they are
adequately trained in the maintenance of the lift.
The Owner/User shall
maintain the periodic inspection and maintenance records
recommended by the manufacturer or ANSI/ALI ALOIM-2013, American National Standard
for Automotive Lifts-Safety Requirements for Operation, Inspection and Maintenance.
The Owner/User shall
display the lift manufacturer’s operating instructions; ALI/SM 93 -1,
ALI Lifting it Right safety manual; ALI/ST-90 ALI Safety Tips card; ANSI/ALI ALOIM-2013,
American National Standard for Automotive Lifts-Safety Requirements for Operation,
Inspection and Maintenance; and in the case of frame engaging lift, ALI/LP-GUIDE, Vehicle
Lifting Points/Quick Reference Guide for Frame Engaging Lifts; in a conspicuous location in
the lift area convenient to the operator.
IMPORTANT SAFETY INSTRUCTIONS
When using your garage equipment, basic safety precautions should always be followed,
including the following:
1. Read all instructions.
2. Care must be taken as burns can occur from touching hot parts.
3. To reduce the risk of fire, do not operate equipment in the vicinity of open containers
of flammable liquids (gasoline).
4. Keep hair, loose clothing, fingers, and all parts of body away from moving parts.
5.
Use only as described in this manual. Use only manufacturer’s recommended
attachments.
6. ALWAYS WEAR SAFETY GLASSES. Everyday eyeglasses only have impact
resistant lenses, they are not safety glasses.
SAVE THESE INSTRUCTIONS
Lifting a Vehicle
Drive vehicle onto lift. Set parking brake and/or use wheel chocks that are provided with lift.
When the vehicle has reached the desired working height, release the power pack button,
and lower the vehicle until the safety locks are engaged. The vehicle should remain level
when all locks are engaged. If one side engages and the other continues to descend, stop
lowering the vehicle, raise it several inches, and try again to engage locks.
IMPORTANT, before walking under the lift ensure that all locks are properly engaged.
It is not safe to work under the vehicle unless all locks are engaged, and the vehicle is
level.
Lowering a Vehicle
Ensure that the area under the vehicle is clear of personnel and tools.
Summary of Contents for EELR369A
