- 36 -
Installation, Operation & Maintenance Manual for Jack Beam
SPECFICATIONS:
Capacity
6,000 lbs.
2725 kg
Minimum Arm Reach
33
”
838 mm
Maximum Arm Reach
50-3/16
”
1275 mm
Minimum Lowered Height
above Deck Surface
3-1/8
”
78.5 mm
Maximum Raised Height above
Deck Surface
13-1/8
”
332.5 mm
Power Requirements @ 20
in3/min (flow rate)
90-120 psi
6-8 bar
Maximum Operating Pressure
@ Rated Load
3915psi
270 bar
Shipping Weight
308 Lbs.
140 Kg.
Fig. 1
I
NSTALLATION
1)
Place jack assembly on lift rack rails.
2)
Install Jack Beam air supply kit, see details in
Appendix B
3)
Once side members are adjusted and jack is centered between the rails, tighten the (4)
hex bolts (2 per side) to lock in place, Fig 2.
Summary of Contents for EELR369A
