JLG 3507, Supplemental Repair Manual, Page: 40 / 180

38
DISASSEMBLY
Dana Holding Corporation ASM-0025E - 212 Axle Service Manual
FIGURE 13: Remove the complete hub (7).
FIGURE 14: Remove the sealing ring from the hub (14).
FIGURE 15: Remove the internal bearing (15).
7
14
15
FIGURE 16: Remove the external thrust blocks from the be-
arings (8) and (15) force a pin-driver into the appropriate slots
on the hub (7).
NOTE:
Hammer in an alternate way so as to avoid clamping or
deformation of the thrust blocks.
FIGURE 17: Use a puller to remove the centering ring (16), the
sealing ring (17) and the bearing (18) from the steering case
(3).
NOTE:
Write down the orientation of both centering ring (16) and
sealing ring (17).
7
16 17 18
16
17
18
3