JLG 3507, Supplemental Repair Manual, Page: 101 / 180

DISASSEMBLY
99 Dana Holding Corporation ASM-0025E - 212 Axle Service Manual
FIGURE 6: Remove snap ring (8) and washer (9) and separate
support (10) and second washer (9) from the check unit (7).
FIGURE 7: Introduce an M14x100 screw "A" into the hole of
the check unit (7) and screw a nut "B" until the spring seat (11)
is moved to the end of stroke.
NOTE:
Use a hex bolt.
FIGURE 8: Rotate snap ring (12) until ring ends match slot
"C".
Remove snap ring (12).
7
8
9
9
10
B
A
A
B
7
11
C
C
12
FIGURE 9: Slowly release nut "B" and disassemble the check
unit.
FIGURE 10: Loosen nut (17) and remove stem (6) from the
cylinder (18).
B
B
11
11
13
14
14
15 16
6
17
18