JLG 3507, Supplemental Repair Manual, Page: 140 / 180

138
ASSEMBLY
Dana Holding Corporation ASM-0025E - 212 Axle Service Manual
FIGURE 19: Insert tool T1 (See drawing ) in-between the two
planetary gears (12).
Align the whole unit, pushing bar T3C (See drawing T3 p. 141)
in as far as it will go, until press tool T3A (See drawing T3
p. 141) is expelled.
FIGURE 20: Lock tool T1 (See drawing T1 p. 140) behind the
planetary gears (12).
After locking the tool, remove bar T3C (See drawing T3
p. 141).
FIGURE 21: Fit snap rings (19) onto the pins (11).
T16C
T1 4
T1
T3C
T1 4
T1
6
6
11
19
FIGURE 22: Position the differential unit (9) under the press,
position bushing T2 (See drawing T2 p. 140) and insert the
planetary pin (11).
FIGURE 23: Place press tool T3B (See drawing T3 p. 141) on
top of the planetary pin (11).
FIGURE 24: Press press tool T3B (See drawing T3 p. 141) as
far down as it will go.
T1 5
T2
9
11
T1 5
T16B
T16B
T2
T3B
T3B
11
11
T16A
T1 5
T16A
T3A
T3A
T2
9
11