manualshive.com logo in svg

JK-Products DAYON LightSpa Beauty, Operating Instruction

The JK-Products DAYON LightSpa Beauty is a revolutionary skincare device that combines LED light therapy and soothing spa-like treatments. Enhance your beauty routine with this versatile device. For detailed operating instructions, simply visit manualshive.com to download the free manual. Discover the secrets to radiant skin with ease and convenience.

Share
Download
background image

Cleaning and maintenance

11/2021

1027959-00A

Operating instructions – 45/70

5.2

Faults

If the INTERIOR DISPLAY does not show 00:00 within 5 seconds:

–

Check the mains plug,

–

Switch the On/Off switch to ‘On’,

–

Please contact Customer Service.

5.3

Cleaning

DANGER!

Infections can be spread by skin contact!
All objects/unit parts that could come into contact with the

user during tanning must be disinfected after every tanning
session:
–

Acrylic glass panel

–

Handles and control panel

–

UV protective goggles

5.3.1

Disinfection

We recommend DAYON rapid disinfectant as a cleaning agent for rapid and
thorough disinfection: It is recommended for use on the sensitive acrylic sur-

face, it is 100% organic and extra kind to the skin (Dermatest: Very good).
The DAYON rapid disinfectant is available to order online: www.dayon.com.

INSTRUCTIONS:

To ensure thorough disinfection, always adhere to the
contact time specified for the disinfectant. Follow the
manufacturer’s instructions for use.

After the prescribed contact time, remove any remaining

residues of the cleaning/disinfecting
agents.

Use a soft, clean single-use paper towel for this pur-
pose.

Carry out a visual inspection. Repeat the cleaning pro-

cedure if you find dirty areas or residues of the clean-
ing/disinfecting
agent.

Carry out a further visual inspection.

Summary of Contents for DAYON LightSpa Beauty







































































Reviews:

No comments

Related manuals for DAYON LightSpa Beauty

Brands by name

Popular brands

Load more brands