manualshive.com logo in svg

JK-Products DAYON LightSpa Beauty, Operating Instruction

The JK-Products DAYON LightSpa Beauty is a revolutionary skincare device that combines LED light therapy and soothing spa-like treatments. Enhance your beauty routine with this versatile device. For detailed operating instructions, simply visit manualshive.com to download the free manual. Discover the secrets to radiant skin with ease and convenience.

Share
Download
background image

Dismantling/Setup/Commissioning

11/2021

1027959-00A

Operating instructions – 27/70

NOTE:
Place a scratch guard between the canopy and base to
avoid damage to the unit.

–

Close the canopy.

NOTE:
Prepare a clean, soft surface before lifting the canopy. Di-

mensions: approx.: 1200 mm x 2200 mm (e.g.: unit’s card-
board packaging).

–

Remove the safety cap.

–

Release and unscrew the three screws.

–

Store the screws safely.

Tool: 4 mm Allen key

Summary of Contents for DAYON LightSpa Beauty







































































Reviews:

No comments

Related manuals for DAYON LightSpa Beauty

HAPRO Onyx Pro-Line Owner'S Manual preview
Onyx Pro-Line
Brand: HAPRO Pages: 18
HAPRO Seecret C200 Original Instructions Manual preview
Seecret C200
Brand: HAPRO Pages: 32
ergoline FLAIR 32/1 SUPER POWER Operating Instructions Manual preview
FLAIR 32/1 SUPER POWER
Brand: ergoline Pages: 54
ergoline PASSION 34/3 SUPER POWER Operating Instructions Manual preview
PASSION 34/3 SUPER POWER
Brand: ergoline Pages: 64
ergoline Avantgarde 550 Operating Instructions Manual preview
Avantgarde 550
Brand: ergoline Pages: 60
ergoline Sunrise 7200 HybridLight Operating Instructions Manual preview
Sunrise 7200 HybridLight
Brand: ergoline Pages: 78
ergoline SUNRISE 480 Turbo Power Operating Instructions Manual preview
SUNRISE 480 Turbo Power
Brand: ergoline Pages: 84
ergoline Prestige 1150 Intelligent Performance Operating Instructions Manual preview
Prestige 1150 Intelligent Performance
Brand: ergoline Pages: 84
ergoline Inspiration 500 Series Operating Instructions Manual preview
Inspiration 500 Series
Brand: ergoline Pages: 86
ergoline PASSION 40/3 PLUS AC Operating Instructions Manual preview
PASSION 40/3 PLUS AC
Brand: ergoline Pages: 92
ergoline AFFINITY 700 Operating Instructions Manual preview
AFFINITY 700
Brand: ergoline Pages: 96
ergoline Inspiration 550 Hybrid Technology Operating Instructions Manual preview
Inspiration 550 Hybrid Technology
Brand: ergoline Pages: 98
ergoline SUNRISE 7200 Operating Instructions Manual preview
SUNRISE 7200
Brand: ergoline Pages: 156
ergoline AFFINITY 500-S SUPER POWER Operating Instructions Manual preview
AFFINITY 500-S SUPER POWER
Brand: ergoline Pages: 176
ergoline AFFINITY 500 SUPER POWER Operating Instructions Manual preview
AFFINITY 500 SUPER POWER
Brand: ergoline Pages: 176

Brands by name

Popular brands

Load more brands