JK-Products DAYON LightSpa Beauty Operating Instruction Download Page 41

Page: 41 / 70

Operation

11/2021

1027959-00A

Operating instructions – 41/70

4.4.1

Navigation

Icon selection /
Key sequence

Description/display

Information

PLUS button

Pressing this button changes the time setting.

MINUS button

Pressing this button changes the time setting.

Time setting

In standby mode, press the plus or minus
button to change the time. Pressing and hold-
ing the plus or minus button for 2 seconds
makes the minutes go up or down faster.

START/STOP button

Press the START/STOP button for 3 seconds
.

Pressing the button after setting the time
starts the unit.

The unit stops.
Unit status: Standby

Standby without button lock.

The unit is ready for operation.

Standby with button lock.

Press and hold the button for 3 sec-

onds deactivates the button lock for 60 sec-
onds.

SPECTRA LEDs button

Pressing the button turns the SPEC-

TRA LEDs on or off.
ON/OFF

BODY COOLING button

Pressing this button changes the fan

speed.
Levels 0–3

Summary of Contents for DAYON LightSpa Beauty







































































Search results

Summary of Contents for DAYON LightSpa Beauty

Reviews:

Related manuals for DAYON LightSpa Beauty

Brands by name

Popular brands

JK-Products DAYON LightSpa Beauty, Operating Instruction

Search results

Summary of Contents for DAYON LightSpa Beauty

Reviews:

Related manuals for DAYON LightSpa Beauty

Brands by name

Popular brands