manualshive.com logo in svg

JK-Products DAYON LightSpa Beauty, Operating Instruction

The JK-Products DAYON LightSpa Beauty is a revolutionary skincare device that combines LED light therapy and soothing spa-like treatments. Enhance your beauty routine with this versatile device. For detailed operating instructions, simply visit manualshive.com to download the free manual. Discover the secrets to radiant skin with ease and convenience.

Share
Download
background image

Dismantling/Setup/Commissioning

26/70

–

The canopy must be held up by a second person.

NOTE!
Only gently prop the canopy otherwise it may tip back.

DANGER!

Risk of injury due to mechanical forces!
–

Always remove the splint and pin when open!

Remove the gas pressure absorber

–

Fold down the safety splint.

–

Remove the pin.

–

Store the safety splint carefully.

There is one safety splint on the top of the gas pressure
absorber and one on the bottom.

–

Remove the gas pressure absorber.

Summary of Contents for DAYON LightSpa Beauty







































































Reviews:

No comments

Related manuals for DAYON LightSpa Beauty

KBL megaSun 4000 Manual preview
megaSun 4000
Brand: KBL Pages: 48
Sun-Co 24 X-Power Manual preview
24 X-Power
Brand: Sun-Co Pages: 8

Brands by name

Popular brands

Load more brands