JK-Products DAYON LightSpa Beauty Operating Instruction Download Page 19 | Manualshive

Page: 19 / 70

background image

Safety instructions and warnings

11/2021

1027959-00A

Operating instructions – 19/70

The components and devices are labelled with the following symbol:
The device will, if requested, be properly disposed of by the JK Corporate
Group. This service is available free of charge. Your partner agency or dealer
will be happy to advise.

Registration numbers

Companies within the JK Corporate Group are registered as manufacturers in
Germany and accept all obligations in respect of the German Electrical and
Electronic Equipment Act.
Registry number JK-International GmbH, division JK-Licht GmbH (lamps):
WEEE-DE 61515020
Registry number JK-Products GmbH (Devices):

WEEE-DE 62655951

1.5.10

EU guidelines

See the included EC Declaration of Conformity.

1.5.11

Export

We would like to point out that the units are intended exclusively for the Euro-
pean market.
The units must not be used in countries such as the USA or Canada.
The JK Group does not accept any liability in the event of non-compliance!

1.5.12

Technical modifications

The unit is built according to the state of the art and the valid safety regula-

tions. The illustrations and specifications on these operation instructions are
subject to technical modifications which are required in order to improve the
unit.
Unauthorised modifications and changes to the unit are prohibited. Failure to
comply with this invalidates the CE conformity!
Please use only original spare parts. Failure to comply with this invalidates
the CE conformity!

«
...
17
18
19
20
21
...
»

Summary of Contents for DAYON LightSpa Beauty







































































Reviews:

No comments

Related manuals for DAYON LightSpa Beauty

Brand: ergoline Pages: 54

megaSun 6800 Adeluxe

Brand: KBL Pages: 60

Hapro Innergize HP8580

Brand: VDL Pages: 56

FLAIR 32/1 SUPER POWER

Brand: ergoline Pages: 54

PASSION 34/3 SUPER POWER

Brand: ergoline Pages: 64

Brand: ergoline Pages: 60

Sunrise 7200 HybridLight

Brand: ergoline Pages: 78

SUNRISE 480 Turbo Power

Brand: ergoline Pages: 84

Prestige 1150 Intelligent Performance

Brand: ergoline Pages: 84

Inspiration 500 Series

Brand: ergoline Pages: 86

PASSION 40/3 PLUS AC

Brand: ergoline Pages: 92

Brand: ergoline Pages: 96

Inspiration 550 Hybrid Technology

Brand: ergoline Pages: 98

Brand: ergoline Pages: 156

AFFINITY 500-S SUPER POWER

Brand: ergoline Pages: 176

AFFINITY 500 SUPER POWER

Brand: ergoline Pages: 176

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands