manualshive.com logo in svg

Jetta JETBOOK 9060, Manual

Share
Download
Jetta JETBOOK 9060 Manual Download Page 96

 

The built-in screen flickers. 

Some flickering is a normal result of the way the screen produces colors. To 
reduce the amount of flickering, try using fewer colors. 

To change the number of colors displayed: 

1. 

Point at the desktop and click with the secondary button. 

2.

 Click Properties, and then Settings. 

3. 

Change the Colors option and click 

OK

. 

For more information, see Windows Help. 

A message indicates a problem with your display settings and that the 
adapter type is incorrect or the current settings do not work with your 
hardware. 

Reduce the size of the color palette to one that is supported by the computer's 
internal display. To change the display properties: 

1. 

Point at the desktop and click with the secondary button. 

2.

 Click Properties, and then Settings. 

3. 

Change a setting and click 

OK

. 

For more information, see Windows Help. 

 

Summary of Contents for JETBOOK 9060


























































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands